MS-IP18G

4K 60Hz 4:4:4 dual stream KVM over IP tranceiver

Description

The MS-IP18G is an HDMI2.0 (4K 60Hz 4:4:4) KVM over 1GbE network transceiver. The transceiver features USB, / KVM pass-through 2-way IR, RS-232 and CEC pass-through. The MS-IP18G is a solution which combines KVM extender with matrix switcher and video wall controller to distribute streams through 1G network. Utilizing H.265/264 codec to break the constraints of network bandwidth and enables the deployment of large-scale projects. The MS-IP18G also supports power redundancy in the form of POE and DC power.

Key Features

  • The distribution integrated architecture provides smooth and uninterrupted operation with high fault tolerance, as the failure of any encoding unit will not affect the whole system.
  • Supports hardware real-time decoding of H.265 and JPEG simultaneously, resolution from 800×600 to 4096×2160, backward compatible with H.264. H.264 fixed data rate is adjustable, to the lowest 128kHz.
  • Supports real-time video encoding of 4K@60fps signals with clear and smooth video quality.
  • The built-in, high-performance image processor provides minimum video latency. Delay time from input to output is less than 16ms.
  • Single unit provides unlimited signal distribution and supports features such as video wall tiling, picture overlay effects, free positioning, free zooming and scheduling management.
  • Provides real-time monitoring of device status and can send immediate alarm through PC software in case of any failure.
  • Supports dual-network hot backup.
  • Supports static/dynamic subtitle overlaying, translucent OSD scan and preview.
  • Can be powered by POE and a DC power supply for power redundancy.
  • Provides ultra-high definition background picture.
  • Supports data transmission on USB 2.0 ports.

Specifications

  • Video ports: HDMI Input and HDMI Output (HDMI 2.0, 4K@60Hz, 8bit, YUV444)
  • Network ports: 1G RJ45 x 1, 1G SPF x 1
  • USB ports: USB 2.0 x 4
  • Audio input ports: 3-PIN Phoenix x 1 / HDMI x 1
  • Audio output ports: 3-PIN Phoenix x 1 / HDMI x 1
  • IR/10 ports: 2
  • Low current relay: 1
  • RS232 / RS485: 3-PIN Phoenix x 1
  • Power supply: PoE or 12V 2A
  • PoE protocol: 802.3af
  • Working temperature: 0°C~ 70°C
  • Encoding format: H.264/H.265/JPEG XS
  • Media format: RTSP
  • Network protocol: TCP/IP, UDP, IGMP
  • Stream data rate: 6M~500Mbps
Downloads
Package Contents
 
  • 1 x MS-IP18G transceiver
  • 2 x surface mounting brackets
  • 6 x 3-pin Phoenix connector

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.